Over the past year, half of our customers paid between $3,200 and $4,900 to replace an electrical panel. When the meter was replaced along with the panel (a 200 amp meter and panel combo), half paid between $7,250 and $8,600.
The numbers below come from our own invoices and our current price book.
What our customers paid
Each range is the middle half of our jobs: half of our customers paid within it, a quarter paid less and a quarter paid more. These are whole-job totals from our invoices dated November 1, 2025 to October 31, 2026, including add-ons, permits and any discounts on the job, rounded to the nearest $50.
| Job | Jobs | Typical range |
|---|---|---|
| Panel replacement, all sizes | 81 | $3,200 to $4,900 |
| 100 to 125 amp | 27 | $3,050 to $3,950 |
| 150 amp | 36 | $3,400 to $5,550 |
| 200 to 225 amp | 11 | $4,000 to $4,950 |
| 200 amp meter and panel combo | 27 | $7,250 to $8,600 |
Today’s prices
From our price book on November 2, 2026. Prices depend on the panel size, whether it is indoors or outdoors, and whether it is mounted flush in the wall or on the surface.
| Panel | Price |
|---|---|
| 100 to 125 amp panel, up to 24 circuits | $2,896 to $3,452 |
| 150 amp panel, up to 30 circuits | $3,607 to $4,138 |
| 200 to 225 amp panel, up to 42 circuits | $4,194 to $4,725 |
| 60 amp sub panel | $2,596 to $2,700 |
| 200 amp meter and panel combo | $4,813 to $9,456, depending on how much of the service is replaced |
Add-ons, only when your home needs them:
| Add-on | Price |
|---|---|
| Electrical permit | $329 |
| Whole-home surge protector, at the panel (Type 2) or the service entrance (Type 1) | $934 or $1,318 |
| Generator interlock kit (to run a portable generator through your panel) | $744 |
| Meter base, 200 amp | $1,767 |
| Service disconnect, up to 225 amps | $1,787 |
| Drywall patch, 24 by 24 inches | $333 |
What changes the price
- Amp size and number of circuits. A bigger panel with more circuits costs more.
- Indoor or outdoor, flush or surface. A panel set into a finished wall may need drywall repair afterward.
- The meter and service. If the meter base or service equipment also needs replacing, the job costs more.
- Permit and power company. Panel replacements need a permit and inspection, and the power company may need to disconnect and reconnect your service.
- Add-ons. Surge protection and a generator interlock are common choices here.
Repair or replace?
Not every panel problem means a new panel. You may need a new panel if breakers trip often, your panel is outdated, or you are adding major equipment, like a tankless water heater. Today’s price-book prices for common repairs:
| Repair | Price |
|---|---|
| Breaker replacement (standard plug-in, single or double pole) | $268 to $282 |
| Panel tune-up, up to 20 circuits or 21 to 42 circuits | $441 or $842 |
| Partial panel rejuvenation, up to 20 circuits | $1,033 |
Southwest Florida factors
- Hurricane season. Hurricane season runs June 1 to November 30. A generator interlock kit lets you safely run a portable generator through your panel during an outage.
- Storms and power surges. Our frequent thunderstorms bring lightning and power surges. A whole-home surge protector helps protect your appliances and electronics.
- Salt air. Near the coast, outdoor panels and meter bases corrode faster.
- Insurance. Insurance companies often ask about the electrical panel when you buy or renew a policy on an older home.
- Permits. Collier County, Lee County and cities like Naples, Fort Myers, Cape Coral and Bonita Springs run their own permits and inspections. The power company, such as FPL or LCEC, may need to disconnect and reconnect your service.
How to get an exact price
Call (239) 215-3330 or send us a message. An electrician will look at your panel and meter and give you your options and prices before any work starts. Financing is available with approved credit.
More about electrical panel upgrades, our electrical services and how our pricing works.
Frequently asked questions
How much does it cost to replace an electrical panel in Southwest Florida?
Half of our customers paid between $3,200 and $4,900 to replace a panel from November 2025 to October 2026. With a 200 amp meter and panel combo, half paid $7,250 to $8,600.
How much does a 200 amp panel cost?
In our current price book, a 200 to 225 amp panel is $4,194 to $4,725. Half of our customers paid $4,000 to $4,950 for one, including add-ons on the job.
Do I need a permit to replace my panel?
Yes. Panel replacements need a permit and inspection. Our electrical permit line is $329 in our current price book.
Can you set up my panel for a generator?
Yes. A generator interlock kit lets you run a portable generator through your panel safely. It is $744 in our current price book.
Should I add surge protection?
It is a common choice here because of our storms. A whole-home surge protector is $934 at the panel or $1,318 at the service entrance in our current price book.
Do you offer financing?
Yes, with approved credit. See our financing options.
Prices on this page were last checked on November 2, 2026.